
( Brand: Ge ), ( Manufacturer Part Number: 5814 ), ( Part Type: Plate Vacuum Tube ), ( Country/region Of Manufacture: United States ), ( Bundle Listing: No )
The JG-5814A GE 5814 12AU7 Plate Vacuum Tube is a high-quality audio component that is a must-have for any vintage or modern audio enthusiast. This tube is manufactured by General Electric, a trusted name in the industry, and is designed to deliver exceptional audio performance.
The 12AU7 is a dual triode vacuum tube that is commonly used in preamplifiers, equalizers, and other audio applications. The JG-5814A GE 5814 version is a direct replacement for the original GE 5814, which was widely used in high-end audio equipment throughout the mid-20th century.
The JG-5814A GE 5814 tube features a glass enclosure that is both elegant and durable. The glass is coated with a vibrant gold finish, which not only adds a touch of class to any audio system but also helps to prevent oxidation and corrosion. The internal components of the tube are made from high-quality materials, including a tungsten filament and a nickel alloy heater, which ensure long-lasting performance and reliability.
The JG-5814A GE 5814 tube is designed to produce a warm, rich sound that is full of detail and depth. It has a smooth and natural frequency response, with a clear and open midrange, and a well-extended bass and treble. The tube also has a low noise floor, which means that it can deliver crystal-clear audio even at low volumes.
The JG-5814A GE 5814 tube is easy to install and use. It is compatible with most audio equipment that uses 12AU7 tubes, and it can be easily swapped out with the original tube. The tube's power requirements are standard for its type, and it can be powered using a 12V DC power supply.
In conclusion, the JG-5814A GE 5814 12AU7 Plate Vacuum Tube is a high-quality audio component that is sure to enhance the sound of any vintage or modern audio system. Its elegant design, long-lasting performance, and warm, rich sound make it an excellent choice for audio enthusiasts who demand the best in audio quality.
Pros of buying JG-5814A 12AU7 plate vacuum tube:1. High-quality construction: The JG-5814A tube is made with high-quality materials and is known for its durability.
2. Good sound quality: This tube provides a warm, rich sound that is great for vintage audio equipment.
3. Wide range of applications: The 12AU7 tube can be used in a variety of audio applications, including preamps, power amps, and tone stacks.
Cons of buying JG-5814A 12AU7 plate vacuum tube:1. Higher cost: Compared to some other vacuum tubes, the JG-5814A can be more expensive.
2. Requires maintenance: Vacuum tubes need to be properly maintained to ensure they last long and perform optimally.
3. Limited availability: This tube may not be as widely available as some other models, making it harder to find replacements if needed.
Conclusion:The JG-5814A 12AU7 plate vacuum tube is a high-quality tube that provides great sound quality for vintage audio equipment. While it may be more expensive and require maintenance, the durability and wide range of applications make it a worthwhile investment for audio enthusiasts. If you're looking for a tube that can deliver a warm, rich sound and is suitable for a variety of audio applications, the JG-5814A is a solid choice.
Recommendation:If you're in the market for a 12AU7 tube, the JG-5814A is definitely worth considering. Its high-quality construction, great sound quality, and wide range of applications make it a reliable choice for anyone looking to upgrade their vintage audio equipment. However, be sure to do your research and compare prices to ensure you're getting a fair deal. Additionally, don't forget to properly maintain your tube to ensure it lasts long and performs optimally.
The ultimate test for a tube is in its circuit e. 96 ohm 103, gm: 7 ohm mutual conductance gm: 2200 IMHO, or 11 ma v 95, mu: 16.
Finally, each tube is tested in a headphone amplifier for acceptable levels of micro phonics. And every one of them has design considerations calibration settings that can cause measurements to be slightly off. 94 ohm 103, gm: 2.
These tubes are dead quiet, no micro phonics or hum at all. Your radio or amplifier. All tubes are tested to verify they reasonably within specifications tube testing procedure in a computer controlled vacuum curve tracer, tracer 3. 36 ma 89, rs: 8.
Any tube that produces a ping think like crystal glass singing from slight physical disturbance is rejected section 2: is: 9. All tube testers are slightly different especially the antiques. 60 ma amplification factor mu: 17 plate resistance RP 7. Do not expect them to match a different tester 1 but they should be fairly similar.
Any tube that produces a constant hum or noise without physical disturbance is rejected. Curve traces: plate resistance RP and current: 20 measurements, VG ma v aka milestones. 60 ma 91, rs: 8. These tubes are inventoried, have two curves graphed with twenty measurements each, and finally a quick test to measure RP, gm mu consisting of 4 surrounding usual bias point for each type tube, according design or operation in the data sheets.
5v sweeping va from 75v to 375v trans conductance gm and current: 20 measurements, 250v VG ma v 96, mu: 93 17. To 0v quick test conditions: plate volts : - CDC grid Ge 5814a vacuum tube matched pair item for sale: stock: 1503 section 1: IA: 10.
The result is tubes may actually be slightly better than they show in test, which great for prospective bidder. These measurements are from my tester, not yours. My tracer 3 has been calibrated as best possible, but it can still show slightly lower than actual measurements due to the filament circuit design stock: 1495 section 1: IA: 10.
02 ma v 92, mu: 17. The quick test follows procedure here. All tubes make noise if you beat on them that's a fact of their design. 81 ma 102, ra: 7.
92 ma 103, ra: 7. 39 ohm 108, gm: section 2: is: 9. That's just the facts.